---
title: Crop steering irrigation with OpenSprinkler | Grow Sensor
description: "Crop steering for everyone: pick a steering style, from very
  generative to very vegetative, and Grow builds the irrigation programme.
  OpenSprinkler runs it, even offline."
url: https://growsensor.co/shop/opensprinkler
---

Grow SensorComing very soon

# Crop steering with OpenSprinkler

Grow Sensor's steering software decides every shot from your readings, and an 8-zone OpenSprinkler controller opens your 24 VAC valves, even when the internet drops.

Contact us for price

OpenSprinkler v4.0 AC

[Register interest](#interest)

-   8 zones, up to 72
-   24 VAC solenoid valves
-   Wi-Fi 6 or wired Ethernet
-   Keeps watering offline

Why steer

## More yield from every room.

Watering timed to what the plant needs at each stage, every day, without a specialist on the valves.

More yield

20–50 %

Expect a 20 to 50 % increase in yield, depending on your starting point and skill level.

### Denser flowers

Drybacks set for each phase push the plant to finish dense and heavy.

### Runs that repeat

One programme per recipe, so a good run happens again, room after room.

### No watering rounds

The shots go out on their own. Hand-watering becomes a choice, not a job.

### Less runoff

Shots sized to your flow rate, pot and medium, so less feed goes down the drain.

Steering styles

## Crop steering for everyone.

Tell Grow your flow rate, pot size and medium, then pick a style from very generative to very vegetative. Grow sizes every shot, times the first and last, and targets the How far the substrate's water content falls from the last shot of the day to the first of the next, as a share of the peak..

Steering towards flower: a drier substrate between shots tells the plant to put its energy into buds rather than leaves. Steering towards growth: a wetter substrate and smaller drybacks tell the plant to build leaves, stems and roots.

Balanced

Steady growth, steady drybacks. A safe place to start.

First shot

1.5 h after lights on

Last shot

3 h before lights off

Overnight dryback

22 %

Shots a day

8

Example programmes for a 12/12 flower room in coco. An advanced section lets you change any setting by hand.

Recipe phases

## A style for every phase.

Give any phase of your recipe its own steering style. When the room moves from stretch to bulk, the irrigation moves with it.

Veg

Flower

Veg 21d

Stretch 14d

Bulk 14d

Ripen 14d

Steering

Vegetative

Dryback

16 %

Steering

Generative

Dryback

28 %

Steering

Balanced

Dryback

22 %

Steering

Very generative

Dryback

35 %

Example recipe for Flower 2, now in stretch. Dryback is the overnight target for each style.

AI feedback

## Talk to your steering programme.

Tell it what you see in the room, in your own words. It checks your readings, suggests a change and tells you why.

[Image: A grower checking a flowering top in the canopy]

Flower 2 · Generative

Flower 2 is stretching more than I'd like.

Overnight dryback has averaged 19 % this week, under the 28 % target. I'd move the first shot 30 minutes later and the last shot an hour earlier, in Flower 2 only.

Reliability

## Keeps watering when the internet doesn't.

### Runs on the controller

Grow sends each day's programme the day before, and OpenSprinkler runs it on its own. If the Wi-Fi drops or Grow goes offline, every shot still goes out on time.

### Reacts as it happens

Online, Grow adjusts the day's programme from your readings as they arrive. If a hot afternoon dries the substrate faster than planned, the next shot comes sooner.

[Image: Coco pots on a bench, a drip stake beside each stem and the nearest coco just watered]

OpenSprinkler · Flower 2

Grow

Offline since 13:42

Programme

Running

Next shot

14:20 · zones 1–4

Safeguards

## Built not to flood a room.

### If a probe fails

The previous schedule keeps running. If a reading looks badly wrong, the programme falls back to its standard schedule.

### Alerts when it matters

A missed shot, a controller offline, a dryback outside target: Grow tells you straight away.

### Your hands, any time

Pause steering, run a zone or flush by hand whenever you like, or change the programme live through the AI.

Alerts · Grow

-   Missed shot

    Flower 2 · zone 3 · 14:20

-   Dryback outside target

    Flower 1 · 31 % vs 22 %

-   Controller offline

    Veg · since 09:12

Setup

## What you need to steer.

[Image: GS-01, the Grow Sensor PRO: matte white instrument with a vented base, head-on studio render]

### Grow Sensor PRO

Reads the room and, through its substrate probe, the root zone. Grow Plus or GrowOps runs the steering.

[See the PRO](https://growsensor.co/shop/the-grow-sensor-pro-uk)

[Image: SubSense substrate probe: three steel prongs upright on the white body]

### A substrate probe per zone

SubSense or SOLYX 14, at least one in every zone. For tight steering, one per 100 sq ft (9.3 m²).

[See SubSense](https://growsensor.co/shop/subsense-substrate-sensor)

[Image: Probe Placement Guide from a three-quarter angle: the slotted right edge and the printed heights]

### Probe Placement Guide

Every probe at the same height, so drybacks compare plant to plant. Steering is only as good as the placement.

[See the guide](https://growsensor.co/shop/probe-placement-guide)

[Image: OpenSprinkler v4.0 AC from a three-quarter angle: white case with an OLED display, two green eight-way terminal blocks along the front, and the Expander header and red power socket on the side]

### OpenSprinkler

Your 24 VAC valves on 8 zones, across several rooms if the wires reach. Feed mixing stays with your doser or tank.

What's next

## Flow checks next. Then the Grow Node.

Next

### Flow confirmation

A flow sensor confirms water actually went out, on every shot.

Soon

### Grow Node

Root-zone readings from every Grow Node feed the steering programme.

[See the Grow Node](https://growsensor.co/shop/grow-node)

[Image: Grow Node: a matte white rectangular box with the Grow Sensor logo centred, from a three-quarter angle]

Later

### Runoff flow

Runoff flow data comes in too, so the programme tunes the feed as well as the timing.

The controller

## Eight zones. Up to 72.

The current AC-powered OpenSprinkler, for 24 VAC solenoid valves. Open-source hardware and firmware.

Zones and valves

Zones

8, up to 72 with expanders

Valves

24 VAC solenoid

Pump or master valve

Supported

Power

24 VAC transformer

Sensors

Sensor ports

4, digital or analog

Rain and flow sensors

Supported

More inputs

Sensor Expander, 16 analog

Connection

Wi-Fi

Wi-Fi 6, 2.4 GHz

Wired

Ethernet module, optional

Grow

Grow Plus and GrowOps

Its own app

Web, iOS and Android

Controller

Model

OpenSprinkler v4.0 AC

Processor

ESP32-C6

Display

OLED, three buttons

Firmware

Open source

FAQ

## Before you order.

No. Set up with your flow rate, pot size and medium, pick a style and Grow sets the shots. An advanced section lets you change any setting by hand.

OpenSprinkler keeps running the day's programme on its own, so every shot still goes out on time. Live adjustments pick up again when it's back online.

No. Feed mixing and dosing stay with your own doser or tank. OpenSprinkler opens the valves and starts the pump.

Yes. The programme uses substrate EC and runoff EC, as well as water content.

24 VAC solenoid valves, the most common kind in irrigation, and a pump or master valve. For DC or latching valves, ask us first.

Grow Plus and GrowOps. On any plan, OpenSprinkler can also run its own schedules from its own app.

Very soon. Contact us for price: use the form below, or email hi@growsensor.co.

Register interest

## Be first to steer with it.

It's in the shop very soon. Tell us about your rooms and we'll send the price and the day it lands.
